Contour next level 2 control solution range

Bayer Corp Contour Next Control Solution 2.5mL, Level 2, Normal

The Bayer Contour Next Normal Control Solution Level 2 is designed to check the accuracy of your glucose meter and test strips. Simply apply a drop of the Contour Next Level 2 Glucose Control Solution to a test strip and run a standard Glucose Test. Confirm that the test results are within the accepted range printed on the test strip vial. It is advised to test your glucose meter and strips accuracy on a regular basis. Designed for use with the Bayer Contour Next Contour Next EZ Meter only.

Bayer Contour NEXT Control Solution Normal 1 vial 2.5ml is for use with Bayer Contour NEXT EZ Diabetes Meter system for quality control testing. One 2.5 ml vial. For In Vitro Diagnostic Use.

Bayer Control Tests should be performed

• Monthly
• With each new vial of test strips
• When you change your batteries
• If you suspect the meter is malfunctioning

Friendly NOTE:

For better Result and Accuracy always use your control Solution.  It is recommended that Every time you start new pack of test strip you should First Start with Control Solution.

To perform a control test:

The Bayer Contour Next Control Solution works specifically to check the accuracy of your glucose test strips. Easily use this product by applying one drop of solution onto a glucose test strip and continue as though it were a normal glucose test. Afterwards, make sure that your test results from this are within the acceptable range found on the vial of your test strips. The Bayer Control Solution level 2 is designed for use with the Bayer Contour Next EZ Meter only. Level 2 checks the accuracy of a more middle-range of numbers.

It is recommended that you perform a control test:

• On a monthly basis
• Each time you replace your glucose test strips
• After changing the batteries of your meter
• If you are questioning the accuracy of your test results

Notes:

• For use with the Bayer Contour Next EZ Meter only.
• Call the manufacturer of your meter immediately if the results are out of range
• Refer to your owner's manual for detailed control test instructions.
• Manufactured by Bayer Diabetes Care

Standard Ground Shipping

Most orders ship within one business day

Delivery estimated within 1 - 6 business days

Need it sooner?

Get it as soon as one business day when you se

Control
test result
is out of
range
(too high
or
too low).Test strip or
control solution
is past the
expiry date
or is past the
discard date.Check all expiry dates and
discard dates. Do not use
expired testing materials.Test strip is
deteriorated
due to heat or
exposure to
moisture.Run another control test with
a new test strip and control
solution.Control
solution is
not at room
temperature
or may not be
mixed well.Shake the control solution
bottle well, about 15 times
before every use, to ensure
the control solution is
mixed well.Incorrect
control solution
was used.Make sure you are using
CONTOUR®NEXT control
solution from Ascensia.Meter could be
damaged.If result is still out of range,
contact Ascensia Diabetes Care
Helpline at 1-800-268-7200.